Proizvodi
Tehnički predlog
RE-2Y(ST)Yv PiMF

In measurement and control engineering. Intended for use when modern process computers have to process large volumes of data, e.g. high-capacity computer systems in waste incineration plants or sewage treatment plants. These cables are suitable for fixed installation in dry or damp rooms, and the version with a black outer sheath can also be used outdoors or for direct burial.
Outer sheath color: | Black for outdoor applications or blue for intrinsically safe systems |
||
Flame-retardant: | According IEC 60332-1-2 | ||
Mutual capacitance: | (at 800 Hz max): C/C: 0.5 mm²: 75 nF/km (at 800 Hz max): C/C: 1.3 mm²: 100 nF/km |
||
Peak operating voltage: | (not for power applications) 300 V | ||
Inductivity: | Max. 0.75 mH/km | ||
Insulation resistance: | > 5 GOhm x km | ||
Conductor resistance: | 0.5 mm²: max. 39.2 ohm/km 1.3 mm²: max. 14.2 ohm/km |
||
Minimum bending radius: | Occasional flexing: 15 x outer diameter Fixed installation: 7.5 x outer diameter |
||
Short-range crosstalk attenuation: | At 60 kHz: min. 1.02 dB/km | ||
Test voltage: | Core/core: 2000 V Core/screen: 600 V | ||
Temperature range: | Occasional flexing: -5°C to +50°C Fixed installation: -40°C to +80°C |
||
Characteristic impedance: | Approx. 100 ohms | ||
Core identification code: | a-core: black b-core: white with consecutive numbers: 1-1, 2-2, 3-3, 4-4 etc. |
Design: 7-wire bare stranded copper conductor, core insulation made of polyethylene (PE), cores twisted into pairs, pair screening made of aluminum-laminated plastic foil with bare copper drain wire, PiMF marking using numbered foil, pairs stranded in layers. Complete stranding contains 1 core for communication (core color orange); The communication core is omitted on single-pair versions. Aluminum-laminated plastic foil static screen with tinned drain wire. Reinforced outer sheath made of PVC. Outer sheath color: black (RAL 9005) or blue (RAL 5015). |