Proizvodi
Tehnički predlog
J-YY
Application:
For connection of telecommunication units inside of buildings in dry and wet rooms, also outdoors if the cable is protected against direct sun irradiation. Not for use in power circuits!
| Conductor material: | Bare copper |
| Conductor construction: | Solid, class 1 |
| Insulation: | PVC TI1 |
| Stranding unit: | Quads |
| Stranding: | Bunches |
| Sheathing material: | PVC TM1 |
| Colour of outer sheath: | Gray RAL 7032 |
| Flame retardant: | VDE 0482-332-1-2/IEC 60332-1 |
| Maximum operating temperature, fixed: | -30 / +70 °C |
| Temperature, moved/during installation: | -5 / +50 °C |
| Bending radius, fixed installation: | 7,5 x DA |
| Insulation resistance: | 100 MOhmxkm |
| Coupling K1: | 300 pF |
| Operating capacity: | 100 nF/km |
| Loop resistance: | 130 Ohm/km |
| Nominal voltage U: | 300 V |
| Core identification: | Colours + rings |
| Attenuation at 800 Hz: | 1,7 |
|
Additional information: Stranding: 4 cores twisted into star-quads, 5 star-quads stranded into one sub-unit, sub-units layed up in layers. Core identification: The star-quads of each bunch are colored as follows: red, green, gray, yellow, white. The cores within one starquad are marked by rings: a-wire 1: without ring |